Penny 3" trucks

Plate Compatability

Plate Compatable Notes
PowerDyne Reactor Neo Will need to remove delrin pivot cup and replace with rubber. To remove delrin pivot cup, insert screwdriver into pivot cup and turn until pivot cup lifts. This will drive a small hole into the pivot cup. You will need to remove the Reactor bushings and use either the canonical that come with the Penny trucks, or buy RollerBones cushions. If you want to grind you'll need to cut down the kingpin with an angle grinder or similar.
PowerDyne Reactor Pro Will need to remove delrin pivot cup and replace with rubber. To remove delrin pivot cup, insert screwdriver into pivot cup and turn until pivot cup lifts. This will drive a small hole into the pivot cup. You will need to remove the Reactor bushings and use either the canonical that come with the Penny trucks, or buy RollerBones cushions. If you want to grind you'll need to cut down the kingpin with an angle grinder or similar.
PowerDyne Thrust (nylon)
SneekrSkate DLX
SneekrSkate SLV
Sunlite